Honeywell CT410B Manual 4 Wire Baseboard Thermostat

The Honeywell Home manual electric baseboard thermostat is easy to install and suitable for 4-wire (double pole) electric heat applications, such as baseboard or line volt systems. This thermostat provides a simple and worry-free operation with its dial-type mechanical control, and it is UL and CSA listed for safety. It is a non-programmable line voltage manual control compatible with electric baseboards, convectors, and non-inductive rated fan-forced heaters.

Featuring a bimetal temperature sensor, this 4-wire thermostat offers a double-line break and positive OFF for easy installation. The temperature range is from 40°F to 80°F (4°C to 27°C) for heat only systems. The power specifications are 2640W at 120 Vac with 22A resistive, 5280W at 240 Vac with 22A resistive, and 5263W at 277 Vac with 19A resistive.

This thermostat can be used to control a single electric baseboard heater or multiple heaters as long as the combined load does not exceed 5280 W, and there is no minimum load requirement. If you are replacing a control that contains mercury in a sealed tube, make sure to dispose of it properly rather than throwing it in the trash. Contact your local waste management authority for instructions on recycling and the correct disposal of the old control unit.

product information: